In strong outdoor light environments, the screen readability of traditional self-service terminals directly affects user experience and equipment efficiency. Rising Technology has developed a 27 inch sunlight readable screen specifically for station self-service ticket machines. It uses the third-generation high-brightness LCD backlight technology to achieve an ultra-high brightness of 2000cd/m² and a contrast ratio of 1000:1, keeping the screen clear and glare-free even in the midday sun. This solution has been successfully applied to major transportation self-service terminal equipment. After installation, the customer complaint rate dropped by 62% and the operation completion time was shortened by 35%. Its industrial-grade design supports 7×24 hours of continuous operation, and its wide temperature range (-20℃~70℃) and explosion-proof glass structure perfectly adapt to harsh outdoor environments, providing self-service terminal manufacturers with ready-to-use, cost-effective display solutions.

.

.

Feedback from self-service ticket terminal manufacturers

“In 2024, our company used RisingStar 27-inch sunlight readable LCD screens to mass-assemble railway station self-service ticket machines. The actual display effect exceeded expectations: the screen still maintained 170° blind spot visibility under 100,000 lux strong light, and the passenger operation error rate was reduced by 38%; the industrial-grade panel withstood the test of -20℃~60℃ temperature difference and operated continuously for 8 months without failure; the anti-glare coating increased the average daily use frequency of the equipment by 25% and reduced the operation and maintenance costs by 20%. This product significantly improved the user experience of the entire outdoor terminal product. Our company and the RisingStar brand are discussing cooperation on the next project.

.

.

Why choose the RisingStar brand sunlight readable LCD screen

1. Core technical features ‌

High brightness and strong light readability ‌: Direct backlight technology is used, the screen has a maximum brightness of 5000nits, supports graded brightness adaptation for outdoor environments (2500/3000/4000/5000nits), and can maintain high contrast display even under direct sunlight to ensure clear information;
Industrial reliability ‌: Passed the -20℃ to 70℃ extreme temperature cycle test, the module life exceeds 50,000 hours, combined with the all-aluminum frame structure (more than 30% lighter than traditional iron), achieving the dual advantages of corrosion resistance and lightweight;
Energy consumption and heat dissipation optimization ‌: Intelligent partition dimming technology reduces power consumption by 25% compared with conventional solutions, and with efficient heat dissipation design (such as flip-chip common cathode LED technology), the long-term operating temperature is 40% lower than similar products;

2. Product form adaptability ‌

Full-scenario coverage ‌: Provides 13.3″-110-inch 16:9 standard screens and 19.5″-86-inch customized strip screens, compatible with mainstream models such as DV430FHB-R00, LD550EGY-SSA1, and adapts to open displays such as self-service terminals and digital signage and fully waterproof whole machine requirements;
Ultra-thin modular design ‌: The thickness is 20% less than that of traditional industrial screens, supports front IP65 waterproof whole machine integration, and meets the requirements of outdoor high dust, rain and fog environment deployment;

3. Quality control guarantee system ‌
   Each device must complete a 24-48 hour continuous aging test before leaving the factory to eliminate early failure risks and ensure stability in high-frequency use scenarios such as logistics warehousing and transportation hubs.

.

.

The detailed specifications of this 27-inch sunlight readable screen are as follows

I. Basic parameters ‌
Panel size ‌: 27.0 inches (diagonal length is about 68.58cm)
Panel type ‌: a-Si TFT-LCD, IPS hard screen (normally black display mode)
Resolution: 1920 (RGB) × 1080 (FHD), 81PPI
Pixel arrangement: RGB vertical strip

II. Display performance
Brightness: 300 cd/m² (typical value)
Contrast: 1000:1 (transmission mode)
Viewing angle: 89°/89°/89°/89° (left/right/up/down, CR≥10)
Response time: 14ms (G to G, typical value)
Color gamut: supports 16.7M colors, 72% NTSC color gamut

III. Physical and structural characteristics
Display area: 597.888 (W) × 336.312 (H) mm
Appearance size: 611.5 (W) × 355.8 (H) × 14 (D) mm, ultra-thin module design
Surface treatment: matte anti-reflective coating, 3H hardness anti-scratch
Weight: 2.89kg (typical) / 3.04kg (maximum)

IV. Interface and electrical parameters
Interface type: 30 pins LVDS (2 channels, 8-bit)
Drive voltage: 5.0V (typical)
Frame frequency: 75Hz, compatible with dynamic compensation technology

V. Environmental adaptability
Working temperature: 0~50℃
Storage temperature: -20~60℃
Protection level: support industrial grade dust and water resistance (IP65)

VI. Application scenarios
Applicable fields: transportation self-service terminal equipment, bank self-service terminal equipment, various outdoor self-service operation panels, etc.
Backlight life: 30,000 hours (WLED light source, no driver design)

VII. Additional technical features
Optical optimization: IPS full viewing angle technology, stable contrast under strong light, reduce ambient light reflection
Signal processing: support LVDS transmission protocol to ensure smooth picture