Display leggibile alla luce solare | Pannello | Moduli-RisingStar

Esempio di visualizzazione leggibile alla luce solare alla stazione degli autobus

Esempio di visualizzazione leggibile alla luce solare alla stazione degli autobus

Quando l'ufficio locale di gestione dei trasporti (LTA) ha completamente aggiornato il segnale intelligente per le fermate degli autobus, ha scelto il RisingStar da 32 pollici di grado industriale.Display leggibile alla luce del sole come soluzione di visualizzazione principale. Con una luminosità massima di 5000nits e un rapporto di contrasto di 1300:1, lo schermo ha risolto completamente il problema della visualizzazione non chiara delle fermate degli autobus tradizionali (generalmente 800-1500nits) sotto una forte luce tropicale.

30 inch Sunlight readable display at bus station example

Perché scegliere la fermata dell'autobus RisingStar da 32 polliciDisplay leggibile alla luce del sole

1. Progettazione ottica professionale, chiarezza più nitida sotto luce forte

1300: 1 alto contrasto con schermo opaco + rivestimento duro 3H, l'interferenza della luce riflessa misurata è ridotta dell'80%, e le informazioni sull'arrivo dell'autobus possono ancora essere visualizzate con precisione sotto il sole di mezzogiorno;
Risoluzione UHD 3840×2160 (139PPI), la nitidezza del testo e dei dettagli della mappa è superiore del 55% rispetto a quella degli schermi tradizionali 1080P;
Tecnologia di angolo di visione completo IPS, il problema di colore orizzontale è migliorato del 30%, garantendo che i passeggeri in attesa dell'autobus a più angoli possano leggere chiaramente

2. affidabilità di grado industriale, senza paura di sfide ambientali estreme

Passed the storage temperature test of -20℃~60℃, adapted to the urban climate with drastic temperature differences in four seasons, and the low-temperature startup speed is better than 90% of similar products

The all-aluminum frame is 35% lighter than the iron structure, and the salt spray corrosion resistance is increased by 3 times, and the deployment life in coastal cities is extended by 40%;

Each device undergoes an 8-hour extreme temperature cycle test from -20℃ to 60℃, and runs for 24 hours to 48 hours before shipment. The early failure rate is less than 0.5%, far exceeding the industry average (generally 3%-5%).

3. Display optimization, adapting to bus scene requirements

The eDP 4 Lane high-speed interface supports the HBR2 protocol (5.4Gbps/channel) and is compatible with the intelligent bus dispatching system interface;
The full lamination process reduces screen reflection, and the visibility in the actual strong light environment is 200% higher than that of ordinary commercial screens.

4. Dual optimization of energy consumption and operation and maintenance costs

10V low drive screen voltage design, power consumption is 15% lower than the 12V standard solution, with 17S4P WLED backlight module, annual power saving exceeds 1200 degrees (calculated based on an average of 18 hours per day);

Modular structure supports rapid replacement of backlight or driver board, maintenance time is 70% shorter than replacement of the whole machine, and downtime loss is reduced by 90%.

Customer feedback: from doubt to trust
The first batch of 200 screens were deployed along Binhai Avenue. After experiencing heavy rains in the rainy season and high temperatures of 40℃ in the dry season, there were no failures. Citizens complained that they could not see the station information clearly, which was the key reason why we chose to add 500 orders. “——Project Director.

Sunlight readable display at bus station example

RisingStar’s five core advantages

Extreme environment reliability

Through -20℃~60℃ extreme temperature cycle test (8 hours) and 24 to 48 hours of aging and running-in, the failure rate is less than 0.3%, far exceeding the peer standard (generally 3-5%);

The all-aluminum frame is 40% lighter than the iron structure, and the salt spray corrosion resistance is increased by 3 times, which is suitable for the humidity environment of coastal cities.

Energy consumption and life revolution
The power consumption of the direct-lit backlight module is 25% lower than that of the edge-lit type, and with intelligent brightness adjustment, it saves more than 2,000 degrees of electricity per year;

80,000 hours of life (per 18 hours a day, 12 years of use), 60% longer than commercial screens (30,000-50,000 hours).

Modular and flexible deployment
Provides two forms: fully waterproof whole machine (IP65) and open module. LTA chooses the former to achieve fast replacement of bus stops (single installation time <15 minutes);
Supports 2500-5000nits multi-level brightness customization to meet the needs of bus stops in different directions.

RisingStar redefines outdoor display with military-grade standards: when peers are still discussing whether it is bright enough, we have used ten years of long-term value to prove our commitment to “always clear”.

t

RisingStar 32.0″ Industrial Panel Technical Specifications

CategoriaParameter
Basic Specifications
Pannello MarcaRisingStar
Dimensioni del pannello32.0 inches
Tipo di pannelloa-Si TFT-LCD Module
Risoluzione3840(RGB)×2160 (UHD, 139PPI)
Pixel ArrangementStriscia verticale RGB
Display Performance
Active Area697.306(W)×392.234(H) mm
Surface TreatmentMatte (Haze 25%) + 3H Hard Coating
Luminosità350 cd/m² (Typ.)
Rapporto di contrasto1300:1 (Tip.)
Angolo di visione89°(L/R/U/D, CR≥10)
Tempo di risposta14 ms (G-to-G, Typ.)
Color Gamut1.07B Colors, 99% sRGB
Refresh Rate60Hz (Native) / 120Hz+120Hz Panel+Backlight / 240Hz with MEMC
Backlight & Power
Backlight Type17S4P WLED
Lifetime30,000 hours
Driving Voltage10.0V (Typ.)
Mechanical Design
Peso4.52 kg (Typ.) / 4.75 kg (Max.)
Frame MaterialAluminum Alloy
Environmental
Temperatura di funzionamento0°C to 50°C
Storage Temperature-20°C to 60°C
Interface & Compatibility
Interfaccia segnaleeDP (4 Lanes, HBR2 5.4G/lane), 30-pin Connector
Touch SupportNon-Touch
ApplicationsIndustrial Displays, Computer Monitors

⚙️
Seleziona la lingua
↕ Scorri per vedere di più
WhatsApp